ad ad do not scale from this print "b" ref .055 1.40 .0100 ref 0.254 2 max sway (typ) "a" "a" -lc: locking clip option shown lc-08-tm-01 (no of pos. x .01969[.5000]) + .1968[5.000] ref .1550 ref 3.937 (see note 9) .2350 5.969 ref .0080 0.203 ref (no of positions -1) x .01969[.5000] .1082 ref 2.749 .0470 ref 1.194 .0197 .0030 typ 0.500 0.076 bth-xxx-xx-d c3 01 02 bth-xxx-xx-x-d-xx no of positions 030, ***050, 060, 090, *120, *150 (per row) lead style -02 only: 030 - 180 multiples of 10 *see note 7 row specification -d: double (use bth-xxx-xx-d & bthh-xxx-xx-d) option -a: alignment pins (use bth-xxx-xx-d-a for styles -01 & -02)(for styles -03 thru -09, see table 4 & fig. 4, sheet 3) -lc: locking clips (see note 8)" (use lc-08-tm-01) -k: polyimide film (use k-500-300, see fig. 2) (available on styles -01 thru -04 & -09 only) (see note 6) -tr: tape & reel (120 pos max) [n/a on -05 thru -06] plating specification -f: flash selective gold with matte tin tails(use t-1sxx-xx-f) (see note 5) -l: light selective gold with matte tin tails(use t-1sxx-xx-l) -h: heavy gold (use t-1sxx-xx-h) -c: electro-polished selective (use t-1sxx-xx-c) lead style -01: .1680[4.267] -02: .2861[7.264] (030 -180 positions available) -03: .4042[10.267] -04: .6000[15.240] -05: .7180[18.237] -06: .8360[21.234] -09: .5224[13.269] *** = 50 pos. only available for -01 and -02 lead style (ref asp-65267-02) .0370 ref 0.940 .2800 7.112 "a" .0375 ref 0.953 see table 2 section "a"-"a" c1 c2 .003[.08] .001[.03] (see note 3) t-1sxx-xx-x (no of pos. x .01969[.5000]) + .1368[3.475] ref -a: alignment pin option shown bth-xxx-xx-d-a .0350 ref 0.889 .0375 ref 0.953 .0375 0.952 ref r c sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .5mm double row terminal assembly by: bth-xxx-xx-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 5/28/1999 3 1 sheet scale: 1:0.533333 insulator: black lcp flammability rating: ul 94v-o terminal: phos bronze f:\dwg\misc\mktg\bth-xxx-xx-x-d-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. minimum pushout force: 6 oz. for styles -01 & -02 8 oz. for styles -03 thru -09 3. maximum variance of .002[.05]. 4. lead styles -03 thru -09: top body (bth) cannot have -a option. 5. -l plating can be substituted for -f plating. 6. if part option is packaged in tray, use k-dot-.276-.375-.005. 7. for new applications requiring these positions,please contact samtec interconnect processing group. 8. due to the high amount of insertion force needed, the Clc option is not compatible with auto placement. samtec recommends manual placement for all assemblies with the Clc option. 9. minimum row to row is .152 [3.86], pin can extend past the wall: .003 [.08]. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision ad
tube: pt-1-24-01-98 plug: tp-26 [styles -03, -04, & -09] tube: pt-1-24-02-105 plug: tp-26 [style -05] "r" ref "s" .276 7.01 .021 0.52 fig. 2 -k: polyimide film pad option [use k-500-300] (see note 6) note: "r" = (no of positions x .01969[.5000]) + .1968[5.000] "s" = (("r" - .276[7.01]) / 2) .020[.51] "t" [style -06] tube: pt-1-24-01-105 plug: tp-26 tube: pt-1-24-01-78 plug: tp-03 [styles -01 & -02] packaging view (parts to have positioin #01 loaded in same direction as arrow) sheet of .5mm double row terminal assembly by: bth-xxx-xx-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 5/28/1999 3 2 sheet scale: 1.875:1 revision ad f:\dwg\misc\mktg\bth-xxx-xx-x-d-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
2 max sway (typ) .010 ref 0.25 .278 ref 7.06 .055 1.397 "b" "b" fig. 3 bth-060-03-x-d-lc shown (styles -03, -04, & -09) (diiferent as shown, otherwise same as fig. 1) bth-xxx-02-d (see note 4) bthh-xxx-01-d 02 01 .265 ref 6.73 .0525 1.334 .0350 0.889 ref (no of pos x .01969[.50000]) + .1368[3.475] ref fig. 4 -a: alignment pin option bth-060-06-x-d-a shown [styles -05 & -06] (different as shown, otherwise same as fig. 1) bth-xxx-02-d (see note 4) r bthh-xxx-03-d-a .0525 ref 1.334 "c" (see note 3) .0375 0.953 ref .003[.08] .001[.03] c (see note 3) .2810 ref 7.137 .0370 ref 0.940 .0605 ref 1.537 section "b"-"b" t-1s60-xx-x .003 .001 see table 2 c4 (see sheet 1) sheet of .5mm double row terminal assembly by: bth-xxx-xx-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 5/28/1999 3 3 sheet scale: 1:0.533333 revision ad f:\dwg\misc\mktg\bth-xxx-xx-x-d-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
